21，怪物信息结构体换为c++

类必须继承自FTableRowBase，因为还要从这里建表

#pragma once
#include “CoreMinimal.h”
#include “PaperFlipbook.h”
#include “Engine/DataTable.h”
#include “MonsterInfor.generated.h”

USTRUCT(BlueprintType)
struct FMonsterInformation : public FTableRowBase
{
GENERATED_BODY()

UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") int32 ID; UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") UPaperFlipbook* FlipBook; UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") float Atk; UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") float MaxHP; UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") float SPD; UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") float DropTreasureRate; UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") float Mass; UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") float MaxTime; UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") int32 DropExpTypeA; UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "Monster") int32 DropExpTypeB; FMonsterInformation() { ID = 0; FlipBook = nullptr; Atk = 0.0; MaxHP = 0.0; SPD = 0.0f; DropTreasureRate = 0.0; Mass = 0.0f; MaxTime = 0.0f; DropExpTypeA = 0; DropExpTypeB = 0; }

};
新建一个表

将原表导出.csv后，

再导入到新表

替换掉蓝图中相关使用的地方（暂时不改成c++）