当前位置: 首页 > news >正文

泰国DAB法规 学习英语~

View Post

泰国DAB法规 学习英语~

Technical Standard for Digital Broadcasting Radio
Receiver (NBTC BS 3004-2567)

  1. Scope
    This standard specifies the technical requirements for digital broadcasting radio
    receivers intended for use in Thailand. It covers the performance, safety, and
    compatibility aspects of digital radio receivers.
  2. Normative References
    The following documents are referenced in this standard: - NBTC regulations on
    radio frequency allocation - International standards for digital broadcasting -
    Relevant safety standards for electrical equipment
  3. Terms and Definitions
    For the purpose of this standard, the following definitions apply:
    3.1 Digital Broadcasting Radio Receiver A device capable of receiving and decoding
    digital radio signals for audio playback.
    3.2 DAB+ Digital Audio Broadcasting Plus, an enhanced version of the DAB standard.
  4. Technical Requirements
    4.1 General Requirements
    4.1.1 The receiver shall be capable of receiving digital radio signals in the frequency
    bands allocated for digital broadcasting in Thailand.
    4.1.2 The device shall comply with all relevant electromagnetic compatibility
    requirements.
    4.2 Performance Requirements
    4.2.1 Sensitivity The receiver shall have a minimum sensitivity of −98 dBm for
    reliable reception.
    4.2.2 Selectivity The receiver shall have adequate selectivity to reject adjacent
    channel interference.
    4.2.3 Audio Quality The audio output shall meet the following requirements: - Signalto-noise ratio: ≥ 60 dB - Total harmonic distortion: ≤ 3% - Frequency response: 50
    Hz - 15 kHz (±3 dB)
    4.3 Language Requirements
    4.3.1 The receiver shall support Thai language display for all user interfaces.
    4.3.2 The device shall be capable of displaying Thai characters correctly.
    4.4 Safety Requirements
    4.4.1 The device shall comply with electrical safety standards for household electrical
    appliances.
    4.4.2 The receiver shall not pose any electrical shock hazard to users.
  5. Testing and Certification
    5.1 Test Procedures
    5.1.1 All tests shall be conducted in accordance with the procedures specified in this
    standard.
    5.1.2 Test equipment shall be calibrated and traceable to national standards.
    5.2 Certification Requirements
    5.2.1 Manufacturers or importers shall submit test reports from accredited
    laboratories.
    5.2.2 The device shall bear the NBTC certification mark when placed on the market.
  6. Marking and Labeling
    6.1 Required Markings
    Each device shall be marked with: - Manufacturer’s name and address - Model
    number - NBTC certification number - Power rating
    6.2 User Documentation
    6.2.1 The user manual shall be provided in Thai language.
    6.2.2 The manual shall contain instructions for installation, operation, and
    maintenance.
  7. Conformity Assessment
    7.1 Initial Assessment
    7.1.1 The initial type approval shall be based on testing of representative samples.
    7.1.2 The assessment shall verify compliance with all technical requirements.
    7.2 Ongoing Compliance
    7.2.1 Manufacturers shall implement quality control procedures to ensure ongoing
    compliance.
    7.2.2 NBTC reserves the right to conduct market surveillance and 抽检 (random
    sampling).
  8. Implementation and Enforcement
    8.1 Effective Date
    This standard shall be effective from the date of publication in the Government
    Gazette.
    8.2 Transitional Period
    A transitional period of six months shall be provided for compliance.
    Annex A: Test Methods
    A.1 Sensitivity Test
    A.1.1 Test Setup - Signal generator - Attenuator - Receiver under test
    A.1.2 Procedure 1. Connect the signal generator to the receiver input 2. Set the
    signal level to −98 dBm 3. Verify that the receiver can decode the signal with
    acceptable audio quality
    A.2 Adjacent Channel Rejection Test
    A.2.1 Test Setup - Two signal generators - Combiner - Receiver under test
    A.2.2 Procedure 1. Generate the desired signal at the nominal frequency 2. Generate
    an interfering signal at the adjacent channel 3. Measure the receiver’s ability to
    reject the interference
    Annex B: Measurement Uncertainty
    All measurements shall include uncertainty analysis in accordance with
    international standards.
    This standard is approved by the National Broadcasting and Telecommunications
    Commission (NBTC) of Thailand.