盛科CTC8096 40G交换芯片常用命令

1、Vlan划分

• Vlan成员查看

show vlan VLANID member-port

• Vlan添加成员

vlan add port GPORT vlan VLANID

• 新建vlan，添加成员

vlan create vlan VLANID default-entry vlan add port GPORT vlan VLANID show vlan VLANID member-port

2、交换芯片信息

• 核压、核温

show chip sensor voltage show chip sensor temp

• 端口信息

show port mac-link

3、链路聚合

• 新建linkagg，添加端口

linkagg create linkagg LINKID linkagg LINKID add member-port GPORT

4、其他主要命令

查看端口对应的mac

show port mac-link

查看mac对应的serdesID

show datapath info serdes

设置环回

chip set serdes SERDES loopback (internal|external) (enable|disable) (lchip LCHIP|)

查看link 状态

show port mac-link (lchip LCHIP|)

内环禁止

serdes n loopback internal disable

外环使能

serdes n loopback external enable

设置自协商

port GPHYPORT_ID cl73-auto-neg ability {10GBASE-KR| 40GBASE-KR4| 40GBASE-CR4| 100GBASE-CR10|100GBASE-KP4 port GPHYPORT_ID auto-neg (enable|disable)

日志等级

debug datapath (ctc|sys) (debug-level {func|param|info|error} |) show stats (mac-rx | mac-tx | mac-all) (port GPHYPORT_ID (end-port END_PORT | ) | all) (mode (plus | detail)| ) (lchip LCHIP| )

fab表

show l2 fdb entry by (mac MAC | mac-fid MAC FID | port GPORT_ID | logic-port LOGIC_PORT_ID | fid FID |port-fid GPORT_ID FID | all ) ((static|dynamic|local-dynamic|mcast|conflict|all)|) (hw|) (entry-fileFILE_NAME|)

某端口详细属性

show port GPHYPORT_ID (check-crc|strip-crc|append-crc|tx-error|code-error) (lchip LCHIP|)

打印linkagg组信息

show linkagg AGG_ID member-ports detail (lchip LCHIP|)

查看vlan成员及vlan属性

show vlan VLAN_ID all

收发数统计

show packet stats

某端口的收发信息

show stats (mac-rx | mac-tx | mac-all) (port GPHYPORT_ID (end-port END_PORT | ) | all) (mode (plus | detail)| ) (lchip LCHIP| )

中断

show interrupt status show interrupt sdk

Dma信息

show dma status

mac使能

port n mac enable

port使能

port n port-en enable

查看交换成环端口收发计数

show stats mac-rx port 0x0018 mode detail

查看眼图：

internal port link monitor disable dkits serdes xx eye times 5